Kunde login

OLIEKØLER 16 RK -8 JIC HALFWIDE 115MM


Mocal oilcooler: part no. OC1162-8

Weights and Measurements:

The coolers are available in various heights and two widths,
115mm matrix or 235mm matrix but only one, 51mm, front to back
measurement. The height of a cooler is usually r ferred to in rows,
these are the number of oilways including top and bottom plates which
carry oil.

Maximum working pressure on the standard range of coolers is
10 bar (150psi) although each cooler is tested to 11.5 bar (170psi)
this is adequate for all but the most arduous motoring applications,
however some customers prefer a higher pressure rating, for instance
where the pressure by pass valve does not provide enough protection
as in high rpm in cold start up conditions or on dry sump installations.


Heavy Duty:
We have introduced a heavy duty (HD), 12bar (180psi)working pressure,
version of the cooler which is dimensionally similar but has aluminium
castings between the plates, on the standard cooler this is the weakest
point where they are unsupported by fins or turbolaters, there is also
thicker material in some areas. These coolers are about 18% heavier.
Læs mere
OLIEKØLER 16 RK -8 JIC HALFWIDE 115MM
Varenr: 124 OC1167-8
Pris: 993,75 kr.
Vægt: 0,00 Kg.
Lager status: -102stk.
Antal:
Gunnar Aaskov Motorsport - OLIEKØLER 16 RK -8 JIC  HALFWIDE  115MM